ENAMELPRO
IS810
The next generation of enamel rating.
Precise and reliable measurement of enamel coating integrity on cans, tubes, ends, flat sheets, and more.
A microscopic pore in a lacquer film doesn’t look like much — until it surfaces as a corrosion claim, a leaker, or a tainted product weeks down the line. The cost of catching it late is always higher than the cost of catching it now.
The IS810 EnamelPro is Innosen’s most advanced semi-automatic enamel rater, engineered to make that catch routine. Higher resolution, smarter pre-test checks, on-board defect localization, and live data into IS1100 Innolytix® — built around how QC teams actually work.
This isn’t an upgrade. It’s the new standard.
Related Products: IS9651 Hoverprobe® II, IS9561 Tube Probe, IS9571 Aerosol Probe, IS1100 Innolytix®
BENEFITS
✅ Real-time, accurate enamel rating that supports decisive coating quality calls
✅ Pre-measurement contact check and electrolyte level monitoring on every test
✅ 7-inch full-colour display with dual-control touchscreen and jog wheel — designed for gloved-hand operation
✅ Native integration with Innolytix® IS1100 for live data tracking, analysis, and reporting
✅ Onboard storage for 100,000 readings — built for traceability and audit compliance
✅ Triple connectivity (USB-C, RS485, Ethernet) for seamless integration with modern factory systems
✅ Password protection and anti-tamper features for consistent, compliant QC testing
✅ Skip the calibration shipment — keep your gauge on site, always certified
FEATURES
✅ High-precision measurement — linearity much better than 1%
✅ Adjustable voltage range of 2–30 V and superior 1 A current range
✅ Compliance with EN 15384-1 and EN 15384-2 measurement standards
✅ Real-time data logging via Innolytix® IS1100 integration
✅ Onsite annual calibration — no shipping required
✅ Reverse voltage lacquer defect localization
✅ Semi-automatic operation with intuitive multilanguage user interface
✅ 7-inch full-colour display with touchscreen and jog wheel dual-control
✅ Triple connectivity: USB-C, RS485, Ethernet
✅ Onboard storage capacity of up to 100,000 readings
✅ IP65-rated powder-coated stainless steel housing with industrial connectors
✅ Universal power supply: 100–240 VAC @ 50/60 Hz
✅ Optional VESA 100×100 mm and 75×75 mm monitor-arm mounting kit
✅ 5-year extended warranty option available
Full technical specifications available in the product datasheet.
Engineered for the people who run the line.
Every detail of the EnamelPro was shaped by the realities of a Quality Control Lab — gloves, splashes, deadlines, and audits.
Every test starts correctly.
Automatic pre-test integrity checks. Contact verification and electrolyte level check.
Memory that keeps up.
100,000 readings on board.
Built for real factories.
IP65. Powder-coated stainless housing. Dust, splashes, knocks — CoatPro shrugs them off.
Find the failure, not just the number.
Reverse-voltage defect localisation. Pinpoint where lacquer defects sit.
Plugs into your world.
Triple connectivity. USB-C, RS485 and Ethernet.
Every reading, in context.
Engineered to work with IS1100 Innolytix®. Readings stream directly into dashboards.
Designed for the line.
A 7-inch touchscreen. Plus a jog wheel — gloves, grit and all.
Calibration, reinvented.
Annual calibration — performed on site. Zero downtime. Always available.
COMPATIBLE FIXTURES
EnamelPro works with the broadest enamel-rating fixture range in the industry — covering cans, ends, tubes, foils, capsules, and more.
| Fixtures* | Application |
|---|---|
| IS9015 Can Stand | 2-piece, 3-piece, and aerosol cans |
| IS9017 Tube Stand | Aluminium collapsible tubes |
| IS9020TMR/IS9019TM End Adapter | Ends, caps, cones, domes, flat sheets |
| IS9018 Aluminium Capsule Stand | Aluminium capsules |
| IS9015XXL Large Can Stand | Drums, pails, extra-large cans |
| IS9030 Foil Adapter | Thin and thick aluminium foil |
| IS9025 EOE Rivet Adapter | Rivet area of easy-open-ends (eoe) |
*The complete fixture and accessory range is detailed in the product datasheet.
| KEY SPECIFICATIONS | |
|---|---|
| Display | 7″ full-colour touchscreen + jog wheel |
| Housing | IP65 powder-coated stainless steel |
| Connectivity | RS485, Ethernet, USB-C |
| Data Storage | Up to 100,000 readings |
| Power | Universal 100–240 V AC, 50/60 Hz |
| Software | IS1100 Innolytix® integration |
| Calibration | Onsite, annual |
| Warranty | Standard; 5-year extended option |
STANDORTE
Spain
Romà Piera i Arcal, 8
08330 Premià de Mar (Barcelona)
Spain
Mehrsprachige Hauptrufnummer:
+34 937 549 526
Email: [email protected]
Hong Kong
11th Floor Dah Sing Life Building
99 Des Voeux Road Central
Hong Kong
Tel: +852 2127 0699
Philippines
808 Citystate Centre Building
709 Shaw Boulevard
1600 Pasig City
Philippines
Tel: +63 2 8696 6965 /
+63 2 8696 6978
USA
7691 N.Overland Trail
80524 Fort Collins
Colorado
USA
Tel: +1 970 305 8721