COATPRO
IS860
The next-generation standard for coating thickness measurement.
Faster readings. Tighter tolerances. Less lacquer in the bin.
Every gram of over-applied lacquer is margin lost — yet canmakers compensate by overapplying lacquer to stay within specification — driving up material costs, cure-oven load, and
waste.
The IS860 CoatPro changes that. It’s Innosen’s most advanced capacitance-based coating thickness gauge, built from the ground up for modern canmaking.
Designed for use with the full range of Innosen coating probes — including the IS9651 Hoverprobe® II, IS9561 Tube Probe, and IS9571 Aerosol Probe — the IS860 CoatPro measures lacquer coatings on flat sheets, formed cans, aluminium collapsible tubes, and aerosols.
High-resolution film weight readings. A factory-floor-ready touchscreen. On-board storage that scales with your shift. And seamless integration with IS1100 Innolytix® so every measurement feeds directly into your QA workflow.
It’s not an incremental upgrade. It’s the new standard.
Related Products: IS9651 Hoverprobe® II, IS9561 Tube Probe, IS9571 Aerosol Probe, IS1100 Innolytix®
BENEFITS
✅ Accurate, real-time film weight readings that support consistent coating quality across shifts
✅ Direct reduction in lacquer over-application — measurable material savings at the coater
✅ Immediate visibility into coating distribution across the tested object
✅ Fast, glove-friendly operation via touchscreen and jog wheel
✅ Seamless data flow into IS1100 Innolytix® for analysis, reporting, and traceability
✅ High-capacity on-board storage supports long-term traceability and batch records
✅ Multi-protocol connectivity for straightforward integration with modern factory systems
FEATURES
✅ High-precision capacitance measurement — linearity better than 1% (subject to probe and sample stability)
✅ Real-time data logging through seamless IS1100 Innolytix® integration
✅ Onsite annual calibration via Innosen’s automatic calibration box
✅ Semi-automatic operation
✅ Compatible with Innosen’s full specialised probe range — flat sheets, formed cans, aerosols, tubes, and more
✅ Multilanguage operator interface
✅ 7″ full-colour display with dual-control (touchscreen + jog wheel), glove-friendly
✅ Triple connectivity: RS485, Ethernet, USB-C
✅ Up to 100,000-reading on-board data storage
✅ IP65 powder-coated stainless steel housing with industrial connectors
✅ Universal power supply: 100–240 V AC, 50/60 Hz
✅ 5-year extended warranty option available
Full technical specifications available in the product datasheet.
Engineered for the people who run the line.
Every detail of the EnamelPro was shaped by the realities of a Quality Control Lab — gloves, splashes, deadlines, and audits.
Precision, quantified.
Linearity that lets you tighten every window.
Calibration, reinvented.
Annual calibration — performed on site. Zero downtime. Always available.
Designed for the line.
A 7-inch touchscreen. Plus a jog wheel — gloves, grit and all.
Built for real factories.
IP65. Powder-coated stainless housing. Dust, splashes, knocks — CoatPro shrugs them off.
Every reading, in context.
Engineered to work with IS1100 Innolytix®. Readings stream directly into dashboards.
Designed for the line.
100,000 readings on board.
Plugs into your world.
Triple connectivity. USB-C, RS485 and Ethernet.
COMPATIBLE PROBES & ACCESSORIES
| Accessory | Application |
|---|---|
| Hoverprobe® II IS9651 | Flat sheets |
| Tube Probe IS9561 | Aluminium collapsible tubes |
| Aerosol Probe IS9571 | Formed cans and aerosols |
| Switchbox IS228C | Run two probes from one gauge |
| VESA Mounting Kit | 100 × 100 mm / 75 × 75 mm |
| KEY SPECIFICATIONS | |
|---|---|
| Display | 7″ full-colour touchscreen + jog wheel |
| Housing | IP65 powder-coated stainless steel |
| Connectivity | RS485, Ethernet, USB-C |
| Data Storage | Up to 100,000 readings |
| Power | Universal 100–240 V AC, 50/60 Hz |
| Software | IS1100 Innolytix® integration |
| Calibration | Onsite, annual |
| Warranty | Standard; 5-year extended option |
STANDORTE
Spain
Romà Piera i Arcal, 8
08330 Premià de Mar (Barcelona)
Spain
Mehrsprachige Hauptrufnummer:
+34 937 549 526
Email: [email protected]
Hong Kong
11th Floor Dah Sing Life Building
99 Des Voeux Road Central
Hong Kong
Tel: +852 2127 0699
Philippines
808 Citystate Centre Building
709 Shaw Boulevard
1600 Pasig City
Philippines
Tel: +63 2 8696 6965 /
+63 2 8696 6978
USA
7691 N.Overland Trail
80524 Fort Collins
Colorado
USA
Tel: +1 970 305 8721