Flat Belt End Conveyor Sensors

9-360-51SS / 11R-360-51SS

DETECT ALUMINUM AND STEEL ENDS WHILE BEING CONVEYED ON A FLAT BELT CONVEYOR

Primarily for die protection in high speed press conveyor systems.

With a fast response time of less than 1 millisecond, the primary use for these sensors is for die protection in high speed press conveyor systems. They can also be used for part tracking, inspection system triggering and jam detection.

BENEFITS & FEATURES

Positive End Detection

Special circuitry and tuning enables the end to be detected but not the steel bed beneath the conveyor belt. A specially tailored narrow sensing field also reduces the effect of side metal.

Robust Design

Slim ‘pancake’ style housing and rugged stainless steel construction give these sensors a long life and great reliability.

Maintenance Free

The use of inductive sensing technology eliminates the need for maintenance.

Additional Benefits

The 9-360-51SS and 11R-360-51SS sensors can also be used for part tracking, inspection system triggering and jam detection.

Related Products

Plain Margin Inspector IS610

TAB VERIFIER

Detects double shells and missing tabs…

Coil Lacquer Presence Detector IS691

End Counting Sensor

Achieve reliable and highly accurate product counts…

Coil Lacquer Presence Detector IS691

End Gap Control System

Maintains the optimum gap at end downstackers…

NOS BUREAUX

Spain
Romà Piera i Arcal, 8
08330 Premià de Mar (Barcelona)
Spain
Tél. Principal Multilangue:
+34 937 549 526

E-mail : [email protected]

Hong Kong
11th Floor Dah Sing Life Building
99 Des Voeux Road Central
Hong Kong
Tél : +852 2127 0699

Philippines
808 Citystate Centre Building
709 Shaw Boulevard
1600 Pasig City
Philippines
Tél : +63 2 8696 6965 /
+63 2 8696 6978

USA
7691 N.Overland Trail
80524 Fort Collins
Colorado
USA
Tél : +1 970 305 8721

© 2023 Innosen. Tous les droits sont réservés.