News and Events

What’s new at Innosen, in one place. Product releases, tradeshow schedules, partnership announcements, and stories from the floor — the work behind smarter alerts, calmer shifts, and operators who stay one step ahead.

Latest Updates

Missing Lacquer on Coated Sheets: 3 Causes and How to Detect Them

Overlapped sheets, lacquer starvation and contamination each leave a different missing lacquer pattern. Here is how many sensors you need to detect them.

How to Maximize Your Coating Line Speed

Raising coating line speed is one of the fastest ways to add output and profit. This step-by-step process shows how to use IS416 sheet skew statistics to increase speed safely, batch by batch.

Aluminum vs. Tinplate: What’s the Difference in Metal Packaging?

Aluminum is light and highly formable, so it dominates beverage cans, aerosols and tubes. Tinplate is tin-coated steel: stiffer and stronger, and the standard for food, paint and chemical cans. Compare weight, corrosion, recycling, cost and uses, and why both depend on the internal coating.

Who are these Misbehaving Sheets and how to catch them?

Oct 19, 2026 | Article

In every 2,000 sheets, one will skew, drift sideways or reach the coater early or late. Meet the three misbehaving sheets behind spoilage, weld wire breaks and leaking cans — and the IS416, IS430 and IS450 systems that catch them.

Enamel Rating: Failure Mode and Effect Analysis

Sep 30, 2026 | Article

Enamel rating tests the integrity of the lacquer layer inside a can. We break down seven failure modes, from poor substrate contact and probe corrosion to fill level and operator influence, that make readings look better than they are, and how the IS9015 Can Stand for Enamel Rater prevents them.

Metal Can Defects: Effects, Causes and Prevention

Sep 25, 2026 | Article

Critical, major or minor: not every can defect carries the same risk. Learn how to spot fractures, missing seals, corrosion and dents, what causes them in the seaming, lacquering and handling stages, and how canmakers can prevent them before defective cans reach fillers.