The 5 Things You Need to Know about Sheet Misalignment

by Niña Munoz, Marketing Executive
Published: March 6, 2020

Sheet coating/lacquering is one of the most important processes in can making. A lot of horrific defects could happen to your cans if lacquer or coating is applied on the wrong place. Some of the many problems include poor quality welds, corrosion (due to missing lacquer) and weld wire breakage, which is why proper sheet positioning should always be observed.  In order to ensure that sheets entering the coater are positioned correctly, it should be clear as to why sheets misalign and what the possible effects are if it goes undetected.

We have listed 5 of the most frequently asked questions about sheet misalignment to help you eliminate coating problems NOW:

1. Why do sheets misalign?

Sheet misalignment occurs due to a wide range of reasons. Basically, when you run sheets through high-speed moving lines, there is a huge possibility that the sheet’s position will change at one point, causing problems further along the way. Usually, misaligned sheets result in problems in the coating process.

No matter how well you control the process, approximately 1 in every 2000 sheets will skew or misalign badly as it goes through the rollers.

 

How misaligned sheets look like:

2. What are the kinds of sheet misalignment that can happen?
And where does it occur?

There are several kinds of misalignment of sheets that could happen during the production process. The most common would be what we call skewing or rotation of the sheets. This happens when sheets miss the dogs when entering the rollers.

Sheets can also move sideways. “Translation” occurs in the coater. This happens when sheets miss the side guides when entering the rollers and drift sideways.

Finally, sheets can arrive too early or too late at the coater causing “Registration” issues.

3. What are the problems caused by sheet misalignment?

Misaligned sheets usually cause problems in the coating process. It causes poor coating placement that leads to weld wire breakage, damage to weld rollers or poor quality welds. This further result in spoilage, downtime, and customer complaints due to poor quality products.

 

Problems that could occur:

4. What can I do to prevent sheets from misaligning?

You will need a device or system that allows you to monitor the accuracy of the alignment of your sheets as they go through the rollers.

The Skew Measurement System is a revolutionary system from Innosen that detects skewed or rotated sheets, giving immediate feedback as the sheets go through the coater.

5. How can I apply maximum process control?

For a complete system for improving coating process, get the Sheet Translation Measurement add-on module which works with the Skew Measurement System, detecting not only skewed sheets but even “translated” sheets. Get the Sheet Registration Measurement add-on module to protect against poor sheet registration by detecting sheets that arrive too early or too late at the coater.

 

Learn more about the Sheet Skew Measurement System and other tools to help you with sheet alignment.

OFFICES

Spain
Romà Piera i Arcal, 8
08330 Premià de Mar (Barcelona)
Spain
Main Multilanguage Tel:
+34 937 549 526
Alternative Direct Tel:
English: +44 1905 887845
Fax: +34 937 549 687
Email: [email protected]

Hong Kong
11th Floor Dah Sing Life Building
99 Des Voeux Road Central
Hong Kong
Tel: +852 2127 0699

Philippines
808 Citystate Centre Building
709 Shaw Boulevard
1600 Pasig City
Philippines
Tel: +63 2 8696 6965 /
+63 2 8696 6978

USA
7691 N.Overland Trail
80524 Fort Collins
Colorado
USA
Tel: +1 970 305 8721

© 2020 Innosen. All rights reserved.