SHEET TRANSLATION MEASUREMENT SYSTEM

IS430 MK II

*Accessory to the IS415 Sheet Skew Measurement System

DETECTS TRANSLATED SHEETS OR SHEETS THAT MOVED SIDEWAYS TO AVOID LEADING CAUSE OF DOWNTIME

 

THE ENHANCED IS430 MK II SHEET TRANSLATION MEASUREMENT SYSTEM

✅ BETTER CONNECTOR PROTECTION

✅ LESS MAINTENANCE

✅ SAVE MONEY

✅ SAVE TIME

Skew, tilt or slight rotation of sheets as they go through the coater is not the only problem that can occur with sheet alignment and coating placement. Some sheets may also miss the side guide when entering the rollers and so they drift sideways or ‘translate’.

This will cause poor coating placement which can then lead to weld wire breakage, damage to weld rollers or poor-quality welds. With Innosen’s IS430 MK II Sheet Translation Measurement System, an add-on to the IS416 Sheet Skew Measurement System, these problems can be avoided.

The IS430 MK II is a Sheet Translation Measurement System for coating and lacquering lines. It is used at the outfeed of a machine and ensures that the sheet does not translate out of tolerance. This ensures that when the sheet is cut, the margins sit in the correct place. Misplaced margins will no longer cause the welder to stop operation.

The IS430 MK II is an upgraded version of IS430 with improved cables and connectors. These improvements allow better connector protection against lacquer splashes and mist, saving time and money for maintenance. The IS430 MK II is an add-on option to the IS416 Sheet Skew Measurement System and consists of a single IS430 MK II Measurement Head.

BENEFITS

✅ No weld wire breakage

✅ No problems down the line

✅ No downtime

✅ No customer complaints

✅ Less maintenance

 

FEATURES

  • Allows you to set your acceptable range of sideways movement in the system
  • Gives instant feedback if the sheet has translated beyond acceptable limits
  • Provides a ‘heartbeat’ signal to your line control to assure that your system is fully operational
  • Helps you determine the capability of your production process by providing statistical data, such as standard deviation and average

Specifications

 
System Components: U-shaped measurement head
Dimension:40mm (w) x 100mm (l) x 230mm (h) or 1.6“ (w) x 4” (l) x 9” (h)
Measurement Range: ± 8mm (±0.32”)
Translation Accuracy :± 0.2mm (±0.8”)
Operation Speed:Up to 150m/minute (500 feet/minute)
Calibration:Automatic
Installation:Mounted on each side of the discharge conveyor; on the fixed outer margin side
Environmental protection rating:IP54

Related Products

IS416

SHEET SKEW MEASUREMENT SYSTEM

Detects skewed or rotated sheets to avoid leading…

SHEET REGISTRATION MEASUREMENT SYSTEM IS450

SHEET REGISTRATION MEASUREMENT SYSTEM

Counts the timing of sheets’ registration to avoid…

OFFICES

Spain
Romà Piera i Arcal, 8
08330 Premià de Mar (Barcelona)
Spain
Main Multilanguage Tel:
+34 937 549 526
Alternative Direct Tel:
English: +44 1905 887845
Fax: +34 937 549 687
Email: [email protected]

Hong Kong
11th Floor Dah Sing Life Building
99 Des Voeux Road Central
Hong Kong
Tel: +852 2127 0699

Philippines
808 Citystate Centre Building
709 Shaw Boulevard
1600 Pasig City
Philippines
Tel: +63 2 8696 6965 /
+63 2 8696 6978

USA
7691 N.Overland Trail
80524 Fort Collins
Colorado
USA
Tel: +1 970 305 8721

© 2020 Innosen. All rights reserved.